[VSK4] Laser-Standard - 2nd version from Tom

JAW · Post by **JAW** » 29 Oct 2006, 01:27

Gday guys

the boat is awesome but id there any chance of bring any skins out any time soon becuase at the momment my boat is green.
Thanks
Jaw

Kwasi · Post by **Kwasi** » 29 Oct 2006, 18:46

if you race it for the first time, you should select the Laser Skin under "settings".
More Skins is up to the community...

Rs200 · Post by **Rs200** » 29 Oct 2006, 19:13

Anyone got a template?

Is the v2 the final version?

Kwasi · Post by **Kwasi** » 30 Oct 2006, 18:42

Rs200 wrote:Is the v2 the final version?

depends on your feedback

Rs200 · Post by **Rs200** » 30 Oct 2006, 19:07

I think minor adjustements to reaching speeds as mentioned earlier need adressing, and the sail should be fully eased when at TWA 179- oe: when you look overhead the angle between hull and boom should be 90 degrees. At the moment when you sail downwind it is fast to have the sail sheeted in slightly.

seaking · Post by **seaking** » 31 Oct 2006, 01:15

at this link there is a template for laser made by www.vskipper.com

http://www.vskipper.com/forum/local_lin ... linkid=349

it's necessary to enroll on the site

Rs200 · Post by **Rs200** » 31 Oct 2006, 17:08

That is a template for the first version which is now outdated by v2.

badboys · Post by **badboys** » 02 Nov 2006, 14:08

laser version 2 there are navigation bug, the used codes of nadeo navigation are those mistake to you. The laser version 1 e' still best one

sorry for my english

Kwasi · Post by **Kwasi** » 02 Nov 2006, 14:14

badboys wrote:laser version 2 there are navigation bug,

Can you sepcify this?
Write in italian, we will get it translated.

badboys · Post by **badboys** » 02 Nov 2006, 15:38

Kwasi wrote:
badboys wrote:laser version 2 there are navigation bug,
Can you sepcify this?
Write in italian, we will get it translated.

il modello laser v2 ha lo stesso problema che noi avevamo avuto con la realizzazione del modello traspac52 fatto da Alberto Aquila. Nel momento in cui vengono usati i codici forniti dalla nadeo per le coperture la barca comincia ad evere dei problemi ( nelle regate di flotta comincia e ruotare velocemente su se stessa, raggiunge delle velocita di circa 200 nodi, ecc ) Alberto e' riuscito con vari tentativi a modificare il codice cancellando le stringhe corrotte, stessa modifica e'stata fatta su tutti gli altri modelli 3d presenti.
Se non modificate quei codici i vostri modelli non andranno mai bene

Sittin · Post by **Sittin** » 26 Jul 2009, 15:34

That was a close one

I was just about to download this file when i realized it was ment for vsk4.
Is there any lasers for vsk5 out there?
Or any boats?

best regards /Sittin

**EDIT**
My misstake mates.
Found it just below "vsk4 downloads".